Fram lost power Saturday january 4th 2020, at 21:00. The power company Tromskraft is working to get the power back.
update: 2020-04-01 23:30 The power is back and we will get the majority of the nodes up as soon as possible.
Author: Steinar Trædal-Henden
Reduced capacity in Fram due to service of cooling system.
2019-05-20: The capacity of job throughput on Fram is reduced in the period may 20th 14:00 – may 21 16:00 due to service work on the water cooling system of Fram.
stallo downtime april 9-11th.
2019-04-11 10:30 Update, stallo is now back in service again.
2019-04-02: 16:35 Due to work on th electrical infrastructure in the building housing stallo we need to shutdown stallo in the period April 9-11. No new jobs are allowed to start that is not finished by april 9th 08:00.
mds crash on fram
2019-03-19 17:55 Secondary MDS server for lustre filesystem crashed between 17:15 and 17:45, And primary MDS server took over and restored filesystem around 17:45 . Some of the jobs running on Fram might be affected. We are investigating the root cause of the incident.
Fram up and running again!
2019-02-28: 21:30 Finaly Fram is up and running again and ready for general use. We are very sorry for the long downtime. Today the storage vendor have been onsite and fixed the last parts.
stallo available again.
2019-02-13 10:00 stallo is up and running and available for general use again.
Stallo downtime february 12th 14:00 – 13th 10:00
Stallo will be shut down at 14:00 due to electrical work in the building housing stallo.
stallo shutdown in short notice.
2019-02-02 14:00
The electrician work in the building housing stallo showed a defect Residual-current device (RCDs). This has to be replaced, an order for a new device is in place, and once it arrive one need to cut the power in the building to replace it.
While we (HPC staff) are waitin for more information it is decided that jobs that are not finished by february 8th 08:00 will not start.
Stallo up again!
2019-02-02 14:00
stallo is now up again and available for normal use.
Stallo downtime February 1st. continue.
The electical work have met unforseen problems, one aggregate will not power on. They need to continue the work further into this evening.